Home » Audi A7 / S7

Audi A7 & S7 Carbon Fiber Parts

Explore Audi A7 and S7 carbon fiber exterior parts designed around the Sportback’s low, wide stance and sweeping roofline. The most effective upgrades sharpen the car’s existing lines without overwhelming its clean factory shape. A front lip can visually lower the nose, while a rear diffuser or trunk spoiler adds definition to the wide liftback rear. Mirror covers, side skirts and vent trims provide smaller contrast details for a restrained OEM-plus appearance. Explore more carbon fiber car parts from AHACARBON.

Browse carbon fiber and selected FRP or PU parts for Audi A7 and S7 models, then choose your generation below before shopping. Fitment can differ between A7 Standard, A7 S line and S7 bumpers, as well as by facelift, sensor openings and mirror equipment. Review each product’s fitment details or send us your vehicle year, trim and clear photos for confirmation.

Filter products
Clear all

21 Products

Build an Audi A7 or S7 Exterior That Still Feels Like an Audi

The Audi A7 and S7 already have one of the most distinctive shapes in the Audi range. Their long roofline flows into a wide Sportback rear, combining the visual character of a coupe with the everyday usability of a large liftback. For many owners, the best exterior upgrades are not the ones that completely change this shape, but the ones that give the existing body lines more definition.

Choose Upgrades That Follow the Sportback Profile

A front lip can make the nose appear lower and wider without covering the factory bumper design. Side skirts visually connect the front and rear of the car, while mirror covers and fender vent trims add smaller carbon details without making the exterior feel overdone. At the rear, a trunk spoiler can continue the slope of the liftback, while a rear diffuser gives the lower bumper more depth and creates a stronger visual finish around the exhaust area.

A balanced Audi A7 or S7 exterior build usually works best when the finish and styling level remain consistent from front to rear. Owners looking for a restrained OEM-plus appearance may begin with mirror covers or a low-profile spoiler. A more aggressive build may combine a front lip, side skirts and rear diffuser, but each part should still follow the original Sportback proportions rather than compete with them.

Confirm the Generation and Factory Bumper Before Ordering

Audi A7 Standard, A7 S line and S7 models may use different front and rear bumper shapes, mounting points, exhaust layouts and sensor positions. A part listed for the same model year is not automatically interchangeable between every trim. Start with the correct generation: browse 2011–2014 A7 / S7 C7 parts,2015–2018 A7 / S7 C7.5 parts or 2019+ A7 / S7 C8 parts.

Material and installation methods also vary by product. This collection includes carbon fiber and dry carbon fiber parts, along with selected FRP or PU options. Some smaller trim pieces use automotive tape, while larger front lips, side skirts and diffusers may require screws, replacement mounting or professional installation. Test-fit the part before drilling, tightening hardware or removing adhesive backing.

Check Related Audi Collections and Fitment Support

Products that also mention RS7 compatibility should still be checked against the vehicle’s exact bumper and body configuration. For upgrades intended specifically for that model, browse the Audi RS7 collection. You can also return to the Audi carbon fiber parts collection to shop other Audi models.

Not certain which part matches your vehicle? Send your model year, exact trim, front or rear bumper photos, mirror details and the product link through our fitment support page before ordering.

Audi A7 & S7 Exterior Parts FAQ

Start with the model year, but also compare the factory headlights, grille, front bumper and rear bumper shape. The 2011–2014 models are generally grouped as C7, 2015–2018 models as the C7.5 facelift, and 2019+ models as C8. Some products have narrower fitment than the full generation range, so always follow the individual product listing rather than relying only on the chassis name.

Not automatically. The A7 and S7 share the Sportback body architecture, but their factory bumpers, lower valances, exhaust openings and trim details may differ. Mirror covers and some trunk spoilers may cover multiple models, while front lips and rear diffusers usually require a closer match to the original bumper.

In many cases they do not. The A7 Standard bumper and S line bumper can have different lower contours, mounting points and trim openings. A product marked for A7 S line or S7 should not be assumed to fit an A7 Standard model unless the product fitment specifically confirms it.

Owners looking for a restrained OEM-plus appearance often begin with mirror covers, vent trims or a low-profile trunk spoiler. A front lip can make the nose appear lower, while side skirts visually connect the front and rear of the car. A rear diffuser adds definition to the wide liftback rear. For a balanced result, keep the finish and styling level consistent across the front, sides and rear.

It can, depending on the vehicle and diffuser design. Some Audi A7 and S7 models have wiring or a foot-swipe trunk sensor routed near the lower rear bumper. Replacement diffusers may require the sensor or wiring to be transferred and secured correctly. Check whether your vehicle has a hands-free trunk, rear parking sensors or other equipment before installation.

Rear diffusers are shaped around a specific exhaust outlet arrangement. The A7 and S7 may use different outlet positions, tip shapes or lower valance designs. Compare the product photos with your factory bumper and exhaust layout, especially when considering an S7-style or RS-style conversion.

The answer depends on the mirror design and the product variant. Some replacement mirror covers are offered separately for vehicles with or without lane-change assist equipment. Confirm the indicator, sensor and mirror housing configuration before choosing a variant. Add-on covers and full replacement covers also use different installation methods.

Carbon fiber provides a visible woven finish and a lightweight exterior upgrade. Dry carbon fiber is generally thinner and lighter because of its manufacturing process. FRP offers a more affordable option and is commonly supplied in gloss black or an unfinished surface. PU is more flexible and is often used for parts that may benefit from greater impact tolerance. Material availability varies by product.

Small add-on trims and some spoilers may use automotive adhesive tape, while larger front lips, side skirts and rear diffusers can require screws, factory mounting points or removal of the original trim. Always test-fit the part before removing adhesive backing or drilling. Professional installation is recommended when bumper removal, sensor wiring or precise alignment is involved.

Only when the product specifically lists the relevant A7 or S7 bumper as compatible. An RS7-style appearance does not mean that an original RS7 part or every aftermarket RS7 component will directly fit an A7 or S7. Full bumper conversions may also affect cameras, radar equipment, parking sensors and exhaust clearance.

Send the vehicle year, exact model, trim, generation and product link. Include clear photos of the complete front or rear bumper, the installation area, exhaust outlets and any visible sensors. For mirror covers, also photograph the mirror housing and confirm whether the vehicle has lane-change assist.