The C7 RS6 is an important generation in the history of the Audi RS6. Unlike the previous generation, the C7 was centered around the Avant body style, combining the practical proportions of an estate car with wider RS-specific exterior bodywork. That wider stance is one of the reasons exterior upgrades for the RS6 C7 should be selected more carefully than parts intended for a standard A6.
This collection is focused specifically on Audi RS6 C7 Avant carbon fiber parts for selected 2013–2015 vehicles. The current range includes side skirts, replacement-style carbon fiber mirror covers and front bumper canards rather than a complete carbon fiber body kit. Each product therefore has its own fitment requirements, and customers should use the individual product page as the final reference before ordering.
Audi RS6 C7 Avant and Typ 4G Exterior Fitment
The RS6 C7 is commonly identified as the C7 or Typ 4G generation, but the chassis designation alone does not guarantee that every A6-family exterior part will fit the RS6. The RS6 uses wider and more aggressive exterior bodywork, so components that follow the shape of the bumper, rocker panel or other body surfaces can be RS-specific.
For this reason, owners searching for Audi RS6 C7 carbon fiber parts should check more than the vehicle year. Confirm that the product description specifically includes the RS6 C7, then compare the body area shown in the product photos with the corresponding part on your vehicle. This is especially important if the car has previously received a replacement bumper, body conversion or aftermarket exterior modification.
RS6 C7 vs RS6 C7.5: Check Product-Specific Fitment
The RS6 C7 and later C7.5 belong to the same broader generation family, and some aftermarket parts may be listed across a wider year range. That does not mean every exterior component is interchangeable between the two.
Products in this collection illustrate that difference clearly. Some RS6-specific items are currently listed for 2013–2016, even though this collection is organized around the 2013–2015 C7 range. When a product page lists a wider or narrower fitment range than the collection page, follow the product-specific information.
This is particularly important for front bumper components. Changes in bumper shape, vent design or previously installed aftermarket parts can affect whether a canard or trim piece aligns correctly. Customers who are uncertain should compare clear front, side and close-up photos before ordering rather than relying only on registration year.
Choosing Audi RS6 C7 Carbon Fiber Side Skirts
Side skirts are one of the most visually significant products currently available in this RS6 C7 collection. The existing carbon fiber side skirt application is designed around the RS6 C7 Typ 4G Avant / Estate / Wagon body and follows the long lower rocker area between the front and rear wheels.
Because the C7 RS6 already has a wide, planted body profile, carbon fiber side skirts can add a stronger lower visual line without changing the character of the entire car. They work particularly well for owners who want the carbon finish to extend beyond smaller details such as mirrors or front bumper trim.
Before ordering Audi RS6 C7 carbon fiber side skirts, inspect the existing rocker panels and confirm that the mounting area has not been modified or repaired. Test fitting before final installation is recommended, and professional installation is the safer choice for achieving consistent alignment along both sides of the vehicle.
Audi RS6 C7 Carbon Fiber Mirror Cover Fitment
Mirror covers are a more subtle way to introduce carbon fiber to the RS6 C7. The mirror product currently included in this collection is a replacement-style component that shares selected applications across the A6, S6 and RS6 C7 family.
Shared fitment does not mean that customers should choose the part only because “C7” appears in the title. The mirror housing and product option still need to match the vehicle. The current replacement-style mirror cover is available with different turn-signal-hole configurations, so confirm the shape and opening of your original mirror housing before selecting an option.
For customers searching for Audi RS6 C7 carbon fiber mirror covers, this is also an example of why product-level fitment is more important than collection-level year ranges. A shared mirror component can legitimately appear in several Audi collections while the RS6 C7 collection itself remains focused only on RS6 owners.
RS6 C7 Front Bumper Canards and Air Vent Fitment
The current carbon fiber front bumper canards are designed for the side air vent area of selected RS6 C7 front bumpers. This makes them different from a universal splitter or generic bumper accessory: the shape needs to follow the specific vent and surrounding bumper surface.
For owners searching for Audi RS6 C7 front bumper canards or carbon fiber aero flicks, confirm that the vehicle still has the compatible RS6 front bumper before ordering. Standard A6 or S6 bumpers, repaired bumpers, aftermarket conversions or modified vent areas should not automatically be assumed to use the same part.
Test fit the pieces on both sides before final installation. The surface should be clean and dry, and alignment should be checked from the front as well as from each side of the vehicle so that both canards sit consistently around the air vent area.
Shared Fitment Across the Audi C7 Family
Some C7 exterior components can be shared across several Audi models, while others are much more RS-specific. The mirror covers in this collection are an example of a shared component, while the RS6 front bumper canards and RS6 Avant side skirts depend much more heavily on the actual RS6 body and bumper shape.
This distinction is important for both customers and page organization. A shared product may appear in an A6, S6 or RS6 collection when the physical fitment is confirmed, but that does not change the SEO purpose of this page. This collection remains centered on the 2013–2015 Audi RS6 C7 Avant, while the product page can describe any additional compatible Audi models.
Carbon Fiber Styling for the RS6 C7 Avant
The C7 RS6 already has a distinctive wide-body Avant profile, so carbon fiber upgrades do not need to be oversized to make a visible difference. Mirror covers introduce a small contrast point around the upper side profile, front bumper canards add detail around the RS-specific air vent area, and side skirts visually extend the lower body line from front to rear.
These upgrades can also be added individually. Customers do not need to build a complete body kit at once. A mirror-cover upgrade creates a relatively subtle change, while side skirts have a much stronger influence on the car’s side profile. Front bumper canards sit between those two approaches by adding a more focused detail to the front end.
Confirm Your Audi RS6 C7 Avant Before Ordering
Before ordering, confirm that your vehicle is an Audi RS6 C7 Avant / Typ 4G and review the year range shown on the individual product page. For side skirts, inspect the rocker-panel shape and mounting area. For mirror covers, check the original mirror housing and turn-signal-hole configuration. For front bumper canards, compare the bumper side air vent area and make sure the car has not been converted to a different bumper style.
Some products may list fitment through 2016 even though this collection is organized around the 2013–2015 RS6 C7 range. In those cases, the more specific product fitment should take priority over the collection heading.
To compare other RS6 generations, browse our Audi RS6 parts by generation, continue to the Audi RS6 C7.5 collection, or explore the newer Audi RS6 C8 collection. You can also browse Audi parts by model. For uncertain fitment, send your model year and clear photos through our fitment support page before ordering.
