Upgrade the front bumper details of your 2022–2024 Audi RS3 8Y Sedan or Sportback with this 4-piece dry carbon fiber front bumper canard set. The kit includes upper and lower canards for both sides of the front bumper, creating a more defined appearance around the factory side air vent areas.

These are vehicle-specific front bumper air vent canards, not a complete front lip or full-width front splitter. For other model-specific upgrades, browse our Audi RS3 8Y parts collection.

4-Piece Upper and Lower Canard Set

The kit consists of four individually shaped components designed for the left and right sides of the RS3 front bumper:

• 1 × left upper front bumper canard
• 1 × right upper front bumper canard
• 1 × left lower front bumper canard
• 1 × right lower front bumper canard

The upper and lower pieces use different lengths and contours to match their intended mounting positions. Their slim blade-style profiles follow the surrounding bumper lines without covering the complete air vent or replacing the factory bumper trim.

Designed for the Audi RS3 8Y Front Bumper

Each canard features a shaped inner corner, extended outer tip and molded three-dimensional profile. The four pieces are mirrored for the left and right sides, helping create a balanced appearance across the front bumper.

This product is specifically positioned as an Audi RS3 8Y front bumper canard set. It should not be confused with a complete front bumper lip, lower splitter or full air vent replacement panel.

Dry Carbon Fiber Construction

The canards are made from dry carbon fiber with a visible woven carbon pattern and gloss exterior finish. The close-up product images show the formed edges, curved transitions and thin molded profile of each component.

• Dry carbon fiber construction
• Visible carbon fiber weave
• Gloss exterior surface
• Four-piece vehicle-specific design
• Separate upper and lower canards

Add-On Front Bumper Installation

These canards are add-on exterior components and do not replace the complete factory bumper, front lip or air vent assembly. Before final installation, position all four pieces on the vehicle and confirm the correct upper, lower, left and right locations.

Check the following before mounting:

• Alignment with the front bumper side vent areas
• Left and right orientation
• Upper and lower canard positioning
• Contact between each molded edge and the bumper surface
• Clearance from nearby grilles, sensors and factory trim

The final mounting method may depend on the supplied hardware and vehicle configuration. Professional installation is recommended for accurate positioning and secure attachment.

Vehicle Fitment

Designed for the following Audi RS3 8Y models:

• 2022 Audi RS3 8Y Sedan
• 2023 Audi RS3 8Y Sedan
• 2024 Audi RS3 8Y Sedan
• 2022 Audi RS3 8Y Sportback
• 2023 Audi RS3 8Y Sportback
• 2024 Audi RS3 8Y Sportback

Compatibility should not be assumed for Audi A3, S3, other RS3 generations or model years outside the listed range. If you are unsure about fitment, send us your vehicle year, body style and clear front bumper photos through our Fitment Support page before ordering.

Complete Your Audi RS3 Exterior

For additional RS3 exterior components across different generations, visit our Audi RS3 collection. You can also browse our complete Audi carbon fiber parts collection for other vehicle-specific upgrades.